Wheel Cylinder Replacement Cost Guide 2021 (Updated)

Wheel Cylinder Replacement Cost Guide 2021 (Updated)
The hydraulic separate of a brake drum brake organization is the bicycle cylinder, which receives brake fluent under atmospheric pressure from the chief cylinder when the brake is applied. It has two cups inside that navy seal and hold pressure and two pistons that move out under that pressure, pushing the rear brake shoes against the drum .
Drum brakes were very park on older vehicles, becoming less common as ABS has become about universal ( it was required in the EU as of 2004, and in the US as of 2000 ). While disk brakes enforce and release identical cursorily, drum brakes act more slowly and with less accurate command of stopping world power, so they are less desirable for manipulation in an ABS system. Some economy vehicles still use brake drum brakes on the raise, and many unhorse trucks silent use drum brakes on the back .

Cost of Wheel Cylinder Replacement

The average cost of replacing a pair of bicycle cylinders on most vehicles is about $ 200.

For some specific estimates of wheel cylinder replacement costs on some common vehicles, using $ 100 an hour as a labor rate :

  • For a 1999 Chevrolet Tahoe, the labor time for wheel cylinder replacement is approximately 1.4 hours. A factory wheel cylinder costs around $80 on average (there are four different brake options for this vehicle) and a Raybestos replacement part costs around $8. The total job cost would be about $220 using OE parts and about $148 using aftermarket parts.
  • For a 2008 Toyota Corolla, the estimated labor time for wheel cylinder replacement is around 1.4 hours. A factory wheel cylinder costs about $60 and a Beck/Arnley replacement part costs around $10. The total job cost would be around $200 with OE parts and about $150 with aftermarket parts.
  • For a 2004 Dodge Neon, the wheel cylinder replacement will take about 1.5 hours. A factory wheel cylinder costs approximately $64 and a Centric replacement part costs about $8. The total job costs around $214 using OE parts and around $158 using aftermarket parts.
  • For a 2008 Suzuki Grand Vitara, the labor time for this vehicle is around 1.6 hours. A factory wheel cylinder costs around $119 and a Wagner replacement part costs around $15. The total job costs around $279 using factory parts and around $175 using aftermarket parts.

It is worth adding that steering wheel cylinders can frequently be rebuilt, though the cost in parts and labor movement is normally about the same as successor. Whether to rebuild or replace can depend more on convenience, what parts are available, than on the cost of either choice .
Saving costs on a bicycle cylinder successor often comes depressed to what else is wrong with the vehicle. normally, the work is done in junction with other brake exercise, and sometimes a steering wheel cylinder will be treated as a small addition parts monetary value to a package brake job. This is more common at shops that specialize in bracken function. Given the proportional rarity of drum brake systems on modern cars, it isn ’ metric ton always a dependable assumption that a general mechanic will have expertness in drum brakes these days ; it ’ s not a bad idea to inquire ahead .

Wheel Cylinder Replacement

drum brake mechanism of a car wheel displaying cylinder Replacing a bicycle cylinder is normally a simple matter. The wheel and brake drum are removed, the brake line is detached, and the rack cylinder pistons are retracted from the shoes .

then, the bolts holding the wheel cylinder to the back plate are removed ; allowing the wheel cylinder to be removed. installation is the reverse and then, the newly cylinder is bled. In most cases there ’ sulfur no need to remove the brake shoes or other brake hardware.

Other Things to Consider

once in a blue moon, a wheel cylinder will fail due to the piston seizing in the cylinder behave. however, the great majority of the time, they are replaced either because they are leaking or as a matter of sustenance during a normal brake job .
If the rack cylinder is replaced during a brake job, normally, the rack cylinder and labor will be included in a package price. If it ’ mho added on to the job, the majority of the labor times above include removing brake shoes which make most of the time over-lapping. A wheel cylinder surrogate, then, would be a modest extra labor charge to a brake job price quite than the 1.5 hours or then if replaced by itself .
If a wheel cylinder leaks badly, there is a adept chance that the bracken shoes wind up soaked with bracken fluid. sometimes if it ’ sulfur minor, it is possible to clean brake shoes up and reuse them as brake fluid itself international relations and security network ’ metric ton corrosive or by and large harmful to friction material .

But if the shoes are in full saturated, it may not be possible to efficaciously clean them. As with most things on a safety-related animate, if there is doubt about the brake shoes being reliable, they will probably be recommended to be replaced. As mentioned, the rack cylinder tug includes removing the brake shoes, so it would normally be done as an extra parts charge with no labor added .
sometimes a roulette wheel cylinder seal will fail and leak plainly due to historic period. The seals are rubber which hardens up and loses flexibility over time .
The other thing that causes them to leak is break from accumulate debris in the system. The wheel cylinder sits at a abject point so that ’ s where it tends to go. Flushing the brake system to ensure uninfected good fluid is a common recommendation at the time of bicycle cylinder substitute and normally a good idea .

FAQ

If my wheel cylinder is leaking, do I need to replace the brakes? only if the shoes are besides reduce. Otherwise a leak can get on the shoes, but brake fluid can be cleaned up fairly easily and faithfully. How long does it take to replace a pair of wheel cylinders? Most of the time about an hour and a one-half. How long should a wheel cylinder last? There is no successor interval, but they ’ re frequently replaced with a brake job, which is not a regretful idea to save possible trouble. Keeping up on brake fluid sustenance is another commodity commit to help with longevity.

reference : https://tonupboys.com
Category : Car Brakes