2004 Tahoe turn signal on and the headlights blink also. …


asked by

Ron S

[external_link_head]

on November 23, 2016

We have a 2004 Chevy Tahoe in the shop that had front end damage. We fixed the front end and put back together according to spec. We made sure that all wires, Plugs etc was installed correctly with no cross issues, crimps, etc.. During our inspection after Tahoe was completed we was doing our light check. We noticed that when we turned on either of the turn signals, the turn signal would blink and also the head lights would blink along with the turn signal. we also noticed that the left head light is nice and bright and the right headlight is dim. The fog lights are also dim when you turn them on. I bought a Multi-function switch from a salvage yard and this did not correct anything. PLEASE HELP

My car has 186399 miles.

My car has an automatic transmission.

Hi there. Check to see where you have grounded the wires to the lights on the front of the vehicle. It sounds like that all of the lights are being grounded on the same terminal. This is why the headlights are flashing and why the fog lights are dimming out. If you need further assistance with having the headlights flash, then seek out a professional, such as one from Your Mechanic, to help you.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

How do I read the event data recorder (EDR) information?

The event data recorder (EDR) system is a key safety feature in your car. The EDR collects information from your vehicle when an accident occurs. Among other things, the EDR tracks how fast you were driving at the time of…

How do I adjust the four-way power driver seat?

The four-way power driver seat is very easy to adjust: 1. Manually move the seat forward or backward by lifting on the seat adjustment handle at the front of the seat, moving the seat forwards or backwards, and releasing the…

Driver Side Inner & Outer Tie Rods and driver side strut being bent.

From what you’ve described, the damage was most likely caused from hitting a pot hole. If the damage was from a pot hole on the right side, in some cases it’s possible for the force to transfer over and damage…

steering and front wheels.

This is most likely a wheel bearing (https://www.yourmechanic.com/services/wheel-bearings-replacement) or brake problem. When brake pads (https://www.yourmechanic.com/services/brake-pads-replacement) drag against the brake rotors, this can cause the vehicle to pull to one side or the other depending on which rotor is being dragged….

Issue with AC after timing chain replacement?

My vote is for coincidence. The temperature blend door actuators are a pretty common failure item on these models as well as timing chain concerns. The temperature blend door actuator is mounted inside the dashboard while the timing chain replacement…

[external_link offset=2]

After having battery disconnected, hazzard and dash lights are blinking, and key wont turn engine over.

Hi there. The security alarm system was tripped and caused the computer to lock out the ignition system. Remove the battery cables (both) for 13 minutes. While the cables are off, operate all the components in the vehicle with the…

Bought a car with 3 month warranty thank god. Day after Check Engine light came on. Brought it back to dealer. 2007 VW Jetta

Hi there – yes, smart and fortunate of you to get a warranty! And in this case, it appears the dealer has “done the right thing” and repaired the issue. It does not necessarily mean there is an on-going problem…

Could it be because of transmission that car lose power and won’t move now into drive or reverse but engine is fine and functional

Hi Danielle. Thanks for contacting us today. There could be a few issues causing this problem, ranging from an inner transmission seal leak, a shift solenoid failure or other internal transmission components being damaged. This is something that a professional…

After doing a head gasket on a +61404532026 Dakota, how long will it take after starting it will it take to start to run normally?

Unless your repair involved replacement or modification of engine controls, such as the IAC valve or throttle position sensor, the instant you start the truck after replacing just a, or both, head gaskets, the engine should operate normally. If the…

A Buyer’s Guide to the 2012 Chevrolet Corvette

The The Chevrolet Corvette is an American original that has stood the test of time. With the 2012 version, you’ll discover improved handling and horsepower that delivers the superior performance you’ve come to expect from this icon. With options as…


[external_footer]