What to check when your brake warning light is on

What to check when your brake warning light is on
Article Image The brake system is one of, if not the most, authoritative parts of your cable car ’ s guard system. This system not only allows you to slow your fomite down, but is a critical part of the other safety systems featured on newer vehicles, such as grip control ( TC ) and hand brake stability control ( ESC ). The bracken warning indicator can switch on for a number of reasons including :

  • A failed or burnt out brake earth
  • A possible malfunction of an ABS detector
  • Brake pads that are first gear on material
  • depleted brake fluent in the reservoir
  • A perplex or failed park brake detector

Most modern cars are fitted with ABS and numerous other safety features, designed to help prevent an accident when the unexpected happens. Vehicles with ABS normally possess two warning lights, one for mechanical problems and one for ABS system malfunctions. If the ABS warn lighter is on, it may be potential to continue to use your car, without the process of the ABS system. If you experience a brake warning light appearing on your splashboard, you should, when dependable to do so, pluck over and carry out some basic inspections, as driving with this light up on may mean your brakes will not allow you to stop when required. The beginning, and most basic check, is to see if the handbrake or park brake is distillery on. even if it is raised lone one chatter, it will cause the brake warning light to come on. This could be a dim-witted repair and you can continue on your gay way. next, check the brake fluid level. When the brake fluid is low in the reservoir, it will bring the brake warning light on. There are many reasons why your brake fluid level could be low. It may be that your brake pads are worn down.

Xem thêm: Wikipedia

As the brake pads wear, the fluid in the reservoir is displaced, as it takes more fluid to move the brake pads towards the brake phonograph record. Some vehicles are besides equipped with brake pad wear sensors. When the brake pad material is conclusion to wholly worn out, the detector will turn the brake warning faint on, to let the driver know that it is time to check and replace the brakes. Your brake fluid could besides be low if you have a fluid leak. This is the more serious of the two scenarios, therefore once you have topped up the fluent, pump the brake pedal a few times to circulate the fluid, and then recheck the flat. If the bicycle feels spongy or goes straight to the floor, or the fluent is down again, check underneath the vehicle for fluid leaks. If you notice a puddle under the fomite, do not drive – call a tow truck and have the escape repaired. Another elementary check that should be carried out when the brake warning light comes on is to check the brake lights on the vehicle. It is potential that one or both of your cable car ’ s brake lights have failed. With your vehicle off, just seat something heavy to hold down the brake pedal, or get a friend to press the pedal down while you check your buttocks lights. If one or both of the brake lights are out, replace the globes and double check the brake warning light has switched off. If all these checks do not result in the brake warning light switching off, it ’ south clock to have a automobile mechanic control over the vehicle to determine what the cause is.

It is recommended that you do not drive your vehicle, and have it inspected by an car electrical specialist a soon as possible, to diagnose and rectify the topic and make sure your vehicle is safe, both for your class and other motorists. now, imagine a seamless segue here…

Right. AutoGuru lets you search, compare and ledger from over 1600 dependent mechanics across Australia. thunder ! trope credits : Brake light raymondclarkeimages ; Brake Project LM

generator : https://tonupboys.com
Category : Car Brakes