Symptoms of a Bad or Failing ABS Control Module

Symptoms of a Bad or Failing ABS Control Module
The anti-lock brake system on a vehicle is an extra base hit feature found on many advanced vehicles. The ABS arrangement is designed to help prevent wheels from locking during heavy brake situations, preventing the vehicle from skidding or hydroplaning. The ABS system is made up of the ABS module, and ABS sensors at each wheel. The sensors detect roulette wheel focal ratio, and will send a message to the ABS module to quickly pump the brakes when it is detected that the vehicle is skidding or has lost traction .
When the ABS system is not functioning then loss of traction, skid, and hydroplaning are far more likely to occur under heavy brake conditions. The ABS system on most vehicles is normally designed to give you enough of warning signs when there is any trouble with the system. Being aware of these warn signs, and addressing the trouble equally soon as they arise will help ensure that your ABS system and vehicle remains functioning for maximal safety .

1. Unresponsive brake pedal

In certain cases, depending on the model of vehicle, when the ABS module fails, the brake pedal may become unresponsive. This is an obvious problem, as an unresponsive brake pedal will not stop a vehicle, or will not be able to do so in an adequately safe manner. In most cases, this will happen lento, over time. normally the brake pedal will become increasingly hard to press until it is no longer reactive.

2. Brake pads require more effort to push

When all components of the brake system are working properly, the pedal should require very little feat. It should be very slowly to press down on, and once pressed should have an immediately obtrusive effect in slowing the vehicle down. If you start to notice that over time the pedal requires increase attempt in order to achieve the same total of braking force, then that may be a signboard of a potential issue with the ABS module.

3. The ABS Light is on

The most common sign of an emergence with the ABS system is the ABS Light coming on. The ABS Light will show an amber color, and is the equivalent of a Check Engine Light, except it is only to diagnose problems with the ABS arrangement. Older vehicles equipped with earlier ABS systems may not have an ABS Light, and may use a Check Engine Light alternatively. If the ABS Light comes on then that is a indisputable sign that there is a problem with the ABS system .

4. The brakes are locking up

When it is functioning correctly the ABS system is designed specifically to prevent the wheels from locking up during heavy brake, preventing loss of grip. however, there can be certain instances where a faulty ABS faculty can behave erratically, causing your brakes to lock up even under normal force conditions. If you are experiencing sporadic behavior from your brakes, such as random snap noises, and/or pump of the brakes, then the ABS module may need to be replaced .

informant : https://tonupboys.com
Category : Car Brakes