How to adjust headlights on Subaru Outback ?

If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one component of your car guilty – your headlights, as well named high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this elementary manipulation, and in this article, we are going to find out how to adjust the headlights of your Subaru Outback? To achieve this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Subaru Outback.


Why adjust the headlights of your Subaru Outback?

So let’s start our content page with the benefit of adjusting the headlights of your Subaru Outback. For most people, our headlights are adjusted well enough, and they appear to light up enough through the night. Unfortunately this is not constantly the circumstance and looking at this setting, either because the headlights on your Subaru Outback are not bright enough, or because you have the sensation that they are too weak is a great idea .

Adjusting the high beams of your Subaru Outback for safety

To begin with, the headlight adjustment of a Subaru Outback must be made for a very easy security reason. Regardless it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. However, if your headlights are too strong, regardless if you are expected to switch to low beam lights when you cross a vehicle, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Subaru Outback . It is consequently essential for others as well as for you to have an ideal adjustment of your headlights.

[external_link offset=1]

Adjusting the headlights of a Subaru Outback for legal reasons

Furthermore to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Subaru Outback?

We will now move on to the part that interests you the most in this article, how to adjust the headlights of his Subaru Outback? This setting might seem a bit complicated, but by simply following the guidance you should be able to perform it without too much problem.

Preparations to adjust the headlights of a Subaru Outback

To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:

  • Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure cautiously.
  • Check that the height adjustment knob for the lights is set to 0


  • Try doing that with half a full tank.
  • Remove all unnecessary weight from the automobile, only one person should be in the driver’s seat.

The headlight adjustment of his Subaru Outback

Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:

[external_link offset=2]

  • Open your hood, locate the screws for horizontal and vertical modification of the headlights of your Subaru Outback (they are usually marked, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
  • Use a cloth or another thing to hide the projector on which you are not making the adjustment.
  • Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall


  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
  • Once finished, verify that the headlights setting of your Subaru Outback is logical, do not hesitate to verify it after you have driven it, in some cases it may move.


If you want to adjust the fog lights on your Subaru Outback, please go through our content page on this subject matter.

If you need more guides on the Subaru Outback, go to our Subaru Outback category.