as a rider, you need to do everything possible to stay safe while out on the road. the first step is by ensuring that your visibility is unhindered at all times. if your visor fogs up, this protective measure will be easier said than done.
especially when you ride at night or in cold weather, this problem will be further aggravated. read on to learn how to stop your helmet visor fogging up in these situations.
You're reading: How to Stop Your Helmet Visor Fogging Up
before you find out how to keep the fog out of your helmet visor, you first need to understand why it fogs up in the first place.
well, rain, the chill from winds, and cold air will also dramatically lower the temperature of your visor. as a result, the moisture from the air you exhale when the visor is on will condense on the surface, causing it to mist up.
how to stop your helmet visor fogging up
there are many ways you can keep your helmet visor free of moisture and fog. in the same way, you can buy different gadgets to ensure that your visor does not fog up when you ride in any condition where this is likely to happen.
all of these solutions will tackle the problem in any of the following ways:
when you increase ventilation or direct it so that it takes the air you exhaled away, it means that your visor will remain free of moisture. this is why steam is a big problem when you are not speeding on the highways on your bike.
the temperature on your helmet visor’s surface should be maintained to ensure that moisture does not condense on it.
last but not least, you should find a way to repel water from your visor. this way, it will never fog up.
best anti-fogging solutions
that said, below are some of the best solutions, strategies, and products you can rely on when you are looking for information on how to stop your helmet visor fogging up:
1. open the visor
although this might seem obvious, not everyone knows how it
writings. opening your visor will ensure that all the air you exhale is directed outside the helmet. since you will be riding at a relatively high speed (certainly faster than you are exhaling), it follows that the increased ventilation will force the exhaled air away. further, an open visor means that air from inside the helmet will not hit it directly.
of course, this is hard to do when it is raining or if you are cruising at high speeds. that said, most of the helmet visors you will come across have a notch that you can use to open the visor a bit. this is the best compromise when you need to increase ventilation inside the helmet while also warding off rain so that it doesn’t hit your face directly.
alternatively, tie a cable around your helmet or chin to keep the helmet visor open a bit. this will also get in enough ventilation to ensure that the visor does not fog up. the only problem here is that rain might still seep into the visor, making it hard for you to see.
2. open the vents
you can also increase ventilation inside the helmet by opening the vents – particularly those placed around your chin. by so doing, the air you exhale will blow away from your visor.
alternatively, check your helmet to see if the lower chin skirt piece is removable. if it is, remove it so that air can run out of the helmet.
in case your helmet has an additional nose guard, try using it to direct the air you exhale down and away from your helmet visor. you can also adjust any neck buffs that are stopping exhaled air from running down doing so will improve air flow and keep your visor looking fresh.
3. invest in a pinlock visor
where anti-fogging technology is concerned, a pinlock visor is the holy grail. the manufacturer will stick the second visor inside the main helmet visor and this will provide the double glazing you need to protect yourself from fog and moisture.
the pinlock is also designed to remain warmer than the main visor. this is due to the bubble of air sealed in between the pinlock and the primary helmet visor, which will ensure that no moisture will condense.
that said, pinlock visors are quite efficient, and you can fit them as easily as you would swap a visor. most of them are roughly priced the same as any standard replacement visor, although you might find that there isn’t one for the particular visor you have.
of course, you can always swap your motorcycle helmet and get something on the higher end. if you do this, the chances are quite high that your new helmet will already have a pinlock visor already fitted.
4. get the raleri fogstop
the raleri fogstop is a visor insert that
writings in pretty much the same way as a pinlock. however, it is designed in such a way that it will stick inside any helmet visor.
this means that you don’t need to use the pinlock bolts inside your visor, which makes the raleri fogstop the best alternative if you are looking for anti-fogging technology to fit on your existing visor.
5. respro foggy mask
the respro foggy mask is a neoprene mask which you can easily fasten inside your helmet to cover your nose and mouth. while looking for a solution on how to stop your helmet visor fogging up, you can count on respro to guide the air you exhale away from the visor.
as a bonus, the respro foggy mast is highly rated and affordable. further, they will ensure that you don’t inhale polluted air while you are out riding. the only problem is that it won’t work with every flip-up helmet.
6. anti-fogging treatments and water repellents
last but not least, you can invest in water repelling products, apply them to your helmet visor, and continue riding with no fogging problem. the best products available in the market include shift it anti-fog, muc-off anti-fog, fogtech, and carnauba wax.
so, there you have it – actionable tips on how to stop your helmet visor fogging up. although some of the solutions above will require a bit of investment on your part, they all work the same – to keep your visor free of fog so you can see better, ride safely, and get to your destination in one piece.
of course, the earlier you learn how to keep your helmet visor free of moisture and fogging, the better your riding experiences will get. it is because of this reason – your pleasure and safety while out cruising on the highways – that we have written and published this guide.
we hope that you have enjoyed spending time with us and that you have learned a couple of tricks on how to stop your helmet visor fogging up. the strategies and products we’ve listed above are time-tested. as such, you can always them to work 100% of the time.
if you liked this article, please feel free to share it with your friends. you can also leave a comment below with questions, additions, edits, and corrections. we look forward to hearing from you! ride safe!
about the author
peter hanson is a motorcycle enthusiast and expert on motorcycle travel. he loves to travel and has covered a lot of countries over the past eight years.
visit his blog to read more articles about motorcycles and helpful tips!