Motorcycle Helmet Relining Service In The USA (All You Need To Know!) – Cars & Amazing Automotive Stuff.

Motorcycle Helmet Relining Service In The USA (All You Need To Know!) – Cars & Amazing Automotive Stuff.

last updated on june 18, 2021 by

a lot of reclining services for motorcycle helmets are available in the united states but we recommend the service of shoei. they offer services for cleaning or reclining replaceable liners with a new one. shoi will recline your motorcycle helmets from full-face to open-faced.

You're reading: Motorcycle Helmet Relining Service In The USA (All You Need To Know!) – Cars & Amazing Automotive Stuff.

motorcycle helmet relining shoei service – main features

features description
warranty these helmets come with a 5-year limited warranty.
full replacement this company will completely refurbish a motorcycle helmet.
inspection service a free impact and safety inspection service are available for each helmet.
materials used a much more comfortable and efficient inner liner can be implemented in any motorcycle helmet.
high credibility this service can offer excellent reliability because it is one of today’s most popular services.

how to reline a motorcycle helmet?

of course, some professionals can offer this service straightforward. however, a procedure can be performed for motorcyclists who have some knowledge and tools. the padding and inner lining of a helmet can be restored so that the motorcycle helmet is no longer loose and provides little use.

regardless of whether it is an open-face helmet or a full-face helmet, users will perform the following procedure efficiently.

a few essential items are required for this task.

1. cloth rag

2. baby shampoo

Read more: DOT Approved Motorcycle Helmet Technology | KIRSH Helmets

3. adhesive remover

4. new liner

1. acquiring the right parts

first of all, you will need to get the right liner for your helmet. nowadays, there is a wide variety of choices, and even shoei can offer great options. not all inner liners are the same, and some may offer better features. 

in some cases, you can get a parts kit to replace a motorcycle helmet liner completely. this means you’ll have the central part and additional pads removed. the size of the components must also be correct depending on the precise size of the motorcycle helmet.

considering the pads wear of your motorcycle helmet, it is highly recommended to get new parts. this may be the best way to enjoy a very comfortable motorcycle helmet. neck pads or cheek pads can offer a design to suit the user’s needs.

each of these parts should be designed to provide a soft-touch feel and a good comfort level. when your helmet cheek pads can no longer offer these features, it is time to replace it. once you have gotten all the required items, you can begin the motorcycle helmet liner replacement procedure.

2.remove the interior paddings from the helmet.

it is possible to begin the parts replacement procedure once you have all the necessary materials. to start removing all of the interior paddings, you must first remove the cheek pads. make some connections using snap fasteners and velcro or any straps.

however, some special systems are used for older helmets. most of the time, these pads are removable, so there should be no problem removing these pieces. a snap clasp can be used to grasp the bottom of each cheek pad while you remove it. 

pulling up may break the cheek pad on one side. if a strap is used to hold this part of the helmet inside, the belt should be removed. in general, there should be no inconvenience in removing the cheek pads.

3. removing all the interior material

it is possible to pry under the edge of the liner to remove the
whole inner liner of the helmet. in some cases, you might hear a tearing noise. however, this only happens with motorcycle helmets that integrate velcro into their construction.

this is because the inner liners adhere to the velcro in a particular and different way than when other materials are applied. the entire helmet liner must be lifted out of the helmet when the rim is turned upwards. 

Read more: SoundtrackINFO: True Lies Soundtrack

adhesive remover may be necessary when dealing with an older motorcycle helmet. a small amount of adhesive remover should be incorporated into a cloth rag. slowly apply the adhesive remover to the edges of the helmet liner. within the right time, the adhesive used on the old motorcycle helmet should begin to peel off and give way. 

4. inserting the new material

once you’ve completed the procedure of removing the inner liner from the motorcycle helmet, you will know the best way to insert the new material. the padding and liner should fit ideally, and no movement should be noticeable. noticed movements must be addressed as they will provide uncomfortable and unsafe wear.

these safety problems could lead to traffic accidents that can be avoided with the correct installation of the new liner. simultaneously, the cheek pads should not be loose but should be adequately tight.

5. removing helmet odor

hot summer days can be more than enough for a motorcycle helmet to start accumulating odors in its inner part. before commencing the parts replacement technique, we have mentioned that you should wash your hands. on the one hand, this prevents the motorcycle helmet with the new parts from smelling bad again.

a bathtub with warm water or a washtub should also be available with a small amount of baby shampoo. baby shampoo should be used instead of another shampoo because of its efficiency. this is an excellent cleansing agent to remove all kinds of harmful components that produce odors.

a power washer can also be used to wash a motorcycle helmet liner. a gentle wash or hand wash should be set up for this purpose. it is also recommended to use a wash bag incorporated with delicate garments.

an antimicrobial detergent or a mild unscented detergent will remove the odor without leaving a residue. a low temperature should also be chosen for washing.

Source: https://tonupboys.com
Category: Motorcycle Helmets